DENIOS Ltd
Audley Ave Enterprise Park
Nova House, Suite 1
Newport, Shropshire
TF10 7DW

Tel.: +44 1952 811991
Email: info@denios.co.uk
Internet: www.denios.co.uk

Working safely at height

Learn more about the causes and consequences of fall accidents, which legal regulations apply and which criteria you should consider in your risk assessment for working on roofs, scaffolding and ladders. In addition, we have compiled some professional solutions for fall prevention for you.

Facts & Statistics: This is what you should know about crash accidents

Falls are the most common cause of fatal accidents at work

The degree of injury severity tends to be particularly high in fall accidents. At 20%, falls are currently the most frequent cause of fatal occupational accidents. In its report on "Occupational Accidents 2020", the authorities registered 23,320 reportable occupational accidents caused by falls from structural installations. These include, for example, falls from roofs or scaffolding - but also falls from ladders or trucks. In 2020, 46 of these fall accidents ended fatally. This means that almost every week a person dies as a result of a fall accident. Even if a fall accident is not fatal, it often has long-lasting and serious health consequences for those affected.

In the construction industry, the risk of falling is times higher than the average.

A special evaluation shows: Workers in the construction industry and other occupations working on construction sites (e.g. metalworkers or electricians) are particularly frequently affected by fall accidents. The risk of a fall accident is about 4 times higher than the average for all the sectors considered. Falls from ladders with almost 50 % and from scaffolding with more than 20 % account for the majority of all fall accidents in the construction industry and construction-related services. From 2009 to 2018, a total of 871 fatal occupational accidents was registred. More than a third of these were the result of a fall.

Even falls from low heights are dangerous

Although the probability of fatal injuries increases with the height of the fall, falls from low heights can also lead to significant injuries. For example, 50 % of all fatal fall accidents occur from a height of less than 5 metres. And fatal accidents have already been recorded at fall heights of less than 2 metres. At lower fall heights, head injuries in particular play a major role. Therefore, suitable head protection should always be worn during such work.

Ladders are the most frequent cause of fall accidents

Statistically, most falls happen when using ladders (31.4 %). Fatalities, on the other hand, are mostly associated with falls from roofs (23.3 %) or scaffolding (16.7 %). High numbers of falls are also registered from lorries and their superstructures, ladders and loading areas.

Causes of fall accidents (Source: German GUV Work Accident Report 2020)

Cause of crash (structural facility) Reportable accidents Fatal accidents
Ladders, stepladders 10.988 (31,4%) 8 (13,3%)
Stairs 6.973 (19,9%) 2 (3,3%)
Trucks as well as ramps, superstructures, loading areas 5.423 (15,5%) 3 (5,0%)
Scaffolding (incl. mobile and temporary scaffolding) 1.873 (5,4%) 10 (16,7%)
Excavations, trenches, shafts, (repair) pits 980 (2,8%) 0 (0,0%)
Roofs, terraces, roof trusses, roof runs 760 (2,2%) 14 (23,3%)
Chairs and tables 480 (1,4%) 0 (0,0%)
Forklift 339 (1,0%) 1 (1,7%)
Ladderways, fixed ladders 276 (0,8%) 0 (0,0%)
Lifting platforms, winches, jacks 191 (0,5%) 1 (1,7%)
Other structural facility at height 2.450 (7,0%) 12 (20,0%)
Other 4.254 (12,2%) 9 (15,0%)

Assessment criteria for fall hazards

If a fall hazard is present, the following criteria may play a role in evaluating the level of danger and in deriving appropriate protective measures:

Criteria Explanation
Falling height Height difference between fall edge and lower lying surface or object
Nature of the underlying surface or object For example, bulk materials (sink, suffocate), water (sink, drown), solid ground (hard impact), rebar connections (impale), containers with hot liquids (burn, scald), containers with liquids (drown, cauterise).
Condition of stand and stand area For example, angle of inclination or degree of slip resistance
Distance to the crash edge Horizontal distance between the load-bearing/passage-proof surface and the non-load-bearing/non-passage-proof surface as well as the distance between the scaffold decking on the one hand and the building, glass surfaces or structural components on the other hand.
Type and duration of activity Physical light or heavy, short-lasting or long-lasting, single or frequent activities
External forces For example, vibrations or other very- or balance-influencing influences.
Weather influences For example, storm, ice and heavy snowfall
Visual conditions For example, lighting, time of day, glare caused by bright surfaces or backlighting or other influences that impair the recognisability of the crash edge, for example.

Ranking of measures for protection against falls from a height

When determining measures for protection against falls from a height, the so-called TOP principle applies. This means that technical protective measures must be given priority over organisational protective measures. These in turn have priority over personal protective measures. In particular, the risk of falling must be prevented or kept as low as possible by selecting the work equipment, taking into account the activities to be carried out. At DENIOS you will find a large selection of suitable work equipment for safe working at height.

Further measures to protect against falling must be selected according to the following order of priority:

1

Fall protection systems

e.g. covers, railings or side guards.

2

Catching devices

e.g. protective nets, protective walls, protective scaffolding

3

Personal protective equipment against falls from a height

e.g. safety harnesses, fall arresters, beam clamps

Important note on the use of personal protective equipment against falls from a height: The appropriate PPE must be selected within the framework of the risk assessment according to the conditions at the workplace. Suitable rescue concepts must be provided to ensure a quick and safe rescue of caught persons (especially in case of risk of suspension trauma). For this purpose, the necessary free space below the stand must be ensured. Suitable anchorage devices must be available. And workers must be instructed in the use of the PPE and instructed on how to carry out any necessary rescue measures.

Work equipment for safe working at heights

Ladders

Quickly access hard-to-reach work surfaces and heights without much effort: These advantages make the ladder a popular and frequently used work tool. Already by choosing the right ladder model, fall risks can be minimised. Therefore, the different types of ladders should always be taken into account as part of the risk assessment and in consideration of the activity to be performed. For example, stepladders offer more safety and better ergonomics than rung ladders. Stepladders ensure a particularly safe standing position and do not have to be leaned against. And platform ladders have a spacious platform that offers sufficient room to move for demanding activities.

Professional ladders of all types often have additional safety features that make working at height safer: For example, profiled steps, non-slip foot plugs and platforms or pre-mounted handrails.

To avoid fall accidents, you should follow these basic rules when using ladders.

  • Never use defective ladders (ladders must also be maintained regularly).
  • Only use ladders that comply with the applicable legislation
  • Always set up the ladder so that it is stable and safe to walk on.
  • Always secure the ladder against slipping, tipping over and being knocked over.

Systems for anti-fall protection

At workplaces with a risk of falling that are not collectively secured, the use of personal protective equipment against falls from a height is mandatory.

Important notes on maximum service life: The performance and functionality of PPE against falls from a height is influenced by environmental conditions (e.g. UV radiation, humidity) and conditions of use. For this purpose, the manufacturer indicates the date of discard on the PPE against falls from a height. Alternatively, the PPE against falls from a height may be marked with the month and year of manufacture, in which case all relevant information for determining the discard date must be given in the instructions for use. After expiry of the discard period, the personal protective equipment against falls from a height may no longer be used and must be replaced immediately.

Other useful products

Head injuries play a major role in fall accidents, even from lower fall heights. Therefore, a suitable safety helmet should always be worn during such work.

Ladders that are set up along or on traffic routes must be secured against overturning by additional measures. For example, safety measures such as barriers can be used for this purpose.

You can use suitable signage to warn of fall hazards or to point out that safety helmets and safety harnesses must be worn.

We are happy to advise you!

Whether on the phone, via e-mail or in person at your premises - we are happy to help and advise you. Get in touch with us.

Free expert advice 01952 811 991

Related articles

Loading...
i

The specialist information on this page has been compiled carefully and to the best of our knowledge and belief. Nevertheless, DENIOS Ltd cannot assume any warranty or liability of any kind, whether in contract, tort or otherwise, for the topicality, completeness and correctness either towards the reader or towards third parties. The use of the information and content for your own or third party purposes is therefore at your own risk. In any case, please observe the locally and currently applicable legislation.

Menu
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 16:00