Fire-rated storage container WFP-M 6 Li-Ion

Product description

• Areas of application: Manual storage for smaller module sizes / Intermediate storage for shipping or for faulty lithium batteries / Storage room for electrical appliances or for an electric vehicle (prototype) / Test room with various facilities (personnel air lock, hazardous materials workstation, system monitoring, etc.).
• Fire-rated stores: Tested and approved as a complete system with 90 minutes fire protection (F 90) from inside and outside. Internationally, versions to meet country-specific legislation (e.g. REI 120). Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall.
• Tested, single-piece spill pallet with easily removable hot-dip galvanised grids (load capacity: 1000 kg / m²).
• External cladding uses galvanised components with 2 layers of paint give long lasting protection. Fire protection panels (A class material, non-combustible) with high insulation properties.
• Door variants: 1 or 2-wing EI₂ 90-C doors, various door positions. For 2-wing doors, the door sequence controller ensures reliable closure of the doors.
• Additional advantages: low entry height of 147 mm and precise roof drainage.
• Structural analysis: to Eurocode 3 (EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m²