DENIOS Ltd
Audley Ave Enterprise Park
Nova House, Suite 1
Newport, Shropshire
TF10 7DW

Tel.: +44 1952 811991
Email: info@denios.co.uk
Internet: www.denios.co.uk

Fire-rated storage container RFP 815.30 SD Li-Ion

Item number: 274694W

  • Best option when large quantities of lithium-ion batteries or large battery modules need to be stored in a separate fire compartment and no clearance is available.
  • The larger sliding doors offer up to 50 % more storage capacity than standard wing door designs.
  • An open sliding door gives easier access to the fire-rated storage container with shelving than a wing door and improves logistical efficiency; when installed outdoors, there is no risk of the doors slamming shut unintentionally due to wind loads.
  • The manually or electrically operated fire-rated doors, tested according to EN 16034, close automatically when the fire detectors are triggered.
  • Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall.
  • Base: tested, single-piece spill pallet with easily removable hot-dip galvanised grids.
  • Water law tested, two piece, hot dip galvanised 5 mm spill pallet in the lower storage level, with removable grids (max. load capacity: 1,250 kg/m²).
  • Long-lasting corrosion protection with fully-galvanised base material and high-quality 2K paint (RAL 9002, grey-white).
  • Fire protection panels with high insulation properties (thickness 100 mm, A class material, non-combustible).
  • Shelf guards on the rear wall.
  • Equipotential bonding with earthing through the steel frame construction.
  • Equipotential bonding with earthing through the steel frame construction.
  • Structural analysis: to Eurocode 3 (EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m².

Variable shelf heights

(flash point ≤ 60 ° C, classes H226, H225 and H224)

The shelf heights vary depending on the number of storage levels (SL) and can be adjusted in 50 mm increments.

  • 2 SL: 1300 mm shelf height
  • 3 SL: 800 mm shelf height
  • 4 SL: 550 mm shelf height

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².

Roof drainage

Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.

Full description

New
SALE
bestseller
[[record.name]]
[[record.actionPrice]] [[record.price]] [[record.price]] Excl. VAT
Price on request

New
SALE
bestseller
[[record.name]]
[[record.actionPrice]] [[record.price]] [[record.price]] Excl. VAT
Price on request

Product description

  • Best option when large quantities of lithium-ion batteries or large battery modules need to be stored in a separate fire compartment and no clearance is available.
  • The larger sliding doors offer up to 50 % more storage capacity than standard wing door designs.
  • An open sliding door gives easier access to the fire-rated storage container with shelving than a wing door and improves logistical efficiency; when installed outdoors, there is no risk of the doors slamming shut unintentionally due to wind loads.
  • The manually or electrically operated fire-rated doors, tested according to EN 16034, close automatically when the fire detectors are triggered.
  • Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall.
  • Base: tested, single-piece spill pallet with easily removable hot-dip galvanised grids.
  • Water law tested, two piece, hot dip galvanised 5 mm spill pallet in the lower storage level, with removable grids (max. load capacity: 1,250 kg/m²).
  • Long-lasting corrosion protection with fully-galvanised base material and high-quality 2K paint (RAL 9002, grey-white).
  • Fire protection panels with high insulation properties (thickness 100 mm, A class material, non-combustible).
  • Shelf guards on the rear wall.
  • Equipotential bonding with earthing through the steel frame construction.
  • Equipotential bonding with earthing through the steel frame construction.
  • Structural analysis: to Eurocode 3 (EN 1993) measured for a characteristic wind load with a dynamic pressure of qw = 0.585 kN/m² and a characteristic ground snow load of sk = 2.5 kN/m²; adequately dimensioned according to DIN 4149, EN 1998-1:2004 for earthquake zone 3. Available with additional equipment for up to wind load zone 4, terrain category I (qw= 1.064 kN/m²) and for up to ground snow load sk = 5.86 kN/m².

Variable shelf heights

(flash point ≤ 60 ° C, classes H226, H225 and H224)

The shelf heights vary depending on the number of storage levels (SL) and can be adjusted in 50 mm increments.

  • 2 SL: 1300 mm shelf height
  • 3 SL: 800 mm shelf height
  • 4 SL: 550 mm shelf height

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².

Roof drainage

Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.

Technical data

Model RFP 815.30 SD Li-Ion
Clear bay depth [mm] 1440
Dimensions (without attachments) W x D x H [mm] 9342 x 2048 x 3594
Bay dimensions W x D x H [mm] 3900 x 1440 x 1300
Containment volume [l] 2 x 1720
Weight [kg] 7900

Documents

Service for the product

Do you need help?
We work hard to give you good advice.
Free Expert Advice 01952 811991

Mon - Thu: 08:30 - 17:00 Fri: 08:30 - 16:00

Menu
Log in
Your basketAdded to basket
Go to basket
We would be pleased to provide you with advice!

Give us a call or fill out the form and we will get back to you as soon as possible.

Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 16:00