asecos radial fan RV 1, explosion-proof, ATEX-compliant, 400 V
Item number: 116941W
- The housing and impeller are manufactured from flame retardent polypropylene
- Sealed to prevent gas leakages
- Connection piece Ø 75 mm
- Vdma and CE conformity
- Protection category IP 55
- Flow rate 60-250 m³/H
- Total pressure 240-175 PA
- With PA / GFK mounting bracket
- The maximum extracted medium temperature is 40 °C. In addition, with this series, the dust content of the gas to be pumped must not be higher than the dust content of the outside air in industrial areas (< 5 mg/m³). The temperature at the installation site must not exceed 40 °C. The fan must be protected against falling objects (marking X).
- Ex-proof version
- Marking: EX II 2/2G Ex h IIB T3 Gb X
- The fan operates at a constant speed and cannot be adjusted. Speed, 2760 rpm
- The fan can therefore only be controlled mechanically by flow control within the exhaust air duct.
Jump straight to:
Description
- The housing and impeller are manufactured from flame retardent polypropylene
- Sealed to prevent gas leakages
- Connection piece Ø 75 mm
- Vdma and CE conformity
- Protection category IP 55
- Flow rate 60-250 m³/H
- Total pressure 240-175 PA
- With PA / GFK mounting bracket
- The maximum extracted medium temperature is 40 °C. In addition, with this series, the dust content of the gas to be pumped must not be higher than the dust content of the outside air in industrial areas (< 5 mg/m³). The temperature at the installation site must not exceed 40 °C. The fan must be protected against falling objects (marking X).
- Ex-proof version
- Marking: EX II 2/2G Ex h IIB T3 Gb X
- The fan operates at a constant speed and cannot be adjusted. Speed, 2760 rpm
- The fan can therefore only be controlled mechanically by flow control within the exhaust air duct.
Technical data
Technical data | Details |
---|---|
Model | Zone 1 |
External dimensions W x D x H [mm] | 270 x 225 x 310 |
Nominal voltage [V] | 400 |
Power [W] | 90 |
Weight [kg] | 4,8 |
Brand | asecos |