Our engineers have developed the first warning system of its kind - SpillGuard®. A completely self-sufficient, immediately ready for use and suitable for any spill pallet - even in ATEX Zone 1!
Leaked hazardous substances within the spill pallet are reliably detected and reported before they can cause major damage.
And installation is easier than ever: Simply place, switch on & be safe!
The leakage of liquid hazardous substances is not uncommon and can happen at any time. To reliably prevent the hazardous substances from getting into the ground, containers should be stored on spill pallets. However, leaking liquids are often not immediately detected in the sump - for example, if personnel are not constantly present or if a regular visual inspection has been forgotten due to everyday operational stresses. An uncleaned leak however, can quickly become dangerous.
For example, in the case of particularly sensitive substances that emit dangerous vapours, rapid action is required to counteract hazards. In addition, the functionality of the spill pallet - and therefore also the compliant sump volume - must be ensured at all times. If there is already liquid in the tub, this may no longer be guaranteed.
This is where SpillGuard® comes in. The warning system detects the leakage as soon as it comes into contact with the liquid and sounds an acoustic and visual alarm. This ensures that you are warned as quickly as possible and that the necessary measures can be taken immediately.
Place it & turn it on- it's as easy as that!
Simply place the SpillGuard® at the lowest point of the spill pallet floor and push the power button. After 30 seconds the initialisation is complete and the SpillGuard® starts the reliable monitoring.
As soon as the SpillGuard® detects liquid exposure, an audible and visual alarm is triggered. This provides an early warning to those present and saves valuable time for emergency measures. Of course, the SpillGuard® can then be deactivated (by pressing the button again). An acoustic signal alerts the user in time for the end of the SpillGuard® service life (up to 5 years).
SpillGuard® is the ideal addition to your safety concept for the storage of hazardous materials. As an additional safety feature, it enables early detection of leaks within the spill pallet. Hazards can therefore be eliminated earlier and the compliant collection volume restored as quickly as possible.
During the development of the SpillGuard®, our engineers focused above all on the requirements of the users. Universal applicability - both with regard to the place of use and the liquids to be detected - as well as simple installation were in focus. Reliable functionality with a long service life completes the SpillGuard® concept - and at a reasonable price.
Here we have summarized the important properties for you once again:
Flexible use for any collecting device - from the simple spill pallet to a storage area
Suitable for all common liquid hazardous substances
Suitable for use in ATEX Zone 1
Completely self-sufficient - no accessories, no system requirements
Fast commissioning (via one-touch) and installation in just a few seconds
Highly resistant and conductive material
Powerful battery life (approx. 5 years)
Intelligent, robust sensor technology for fast detection of leaks
Compact format and clever design for easy handling
A regular visual signal (red LED) signals the safe function over the entire service life
Acoustic and visual warning signal for contact with liquids
SpillGuard® is designed for use with all common liquid hazardous substances. The SpillGuard® resistance list shows for which hazardous substances the functionality of the SpillGuard® has been proven over a defined period of at least 24 hours. For a substance not listed in the SpillGuard® resistance list, a laboratory test can be carried out on request to check the suitability of the SpillGuard®.
✔ Suitable ✘ Not suitable
|Hazardous Material||EC number||Concentration||Suitability|
|Acetic acid ethyl ester||205-500-4||99%||✔|
|Ammonia Water (-solution)||215-647-6||20%||✔|
|Hydrogen peroxide solution||231-765-0||35%||✔|
|Iron - (III) -chloride||231-729-4||Saturated||✔|
1Viscosity ≤ 3000 mPas, relative permittivity ≥ 2