Custom solutions become necessary whenever large storage capacities are required, but limited space is available. Or even if individual equipment needs to be installed within the solution or if the equipment is to be used outdoors.
In these cases, heating chambers with up to three levels of storage and at twice the depth can be installed, as well as space-saving doors. Or completely independent air-conditioning systems can be developed if required.
For outdoor use, DENIOS manufactures large-scale thermal systems that can be connected to covered passageways.
Large capacity with the smallest footprint
If a large storage capacity is required in a small space, DENIOS offers solutions with up to 3 storage levels and double compartment depth. In addition, if space limits the use of swing doors, roller shutter doors provide time and space saving opening and closing. In addition, we offer the possibility of designing individual thermal chambers with lifting or sliding doors.
As with our other custom solutions, the comprehensive range of optional extras and customization options is also available here. Depending on the size of the system and the material being stored, several air conditioning systems with different temperatures are used. The flexibility of our thermal systems leaves a lot of room for design.
Facilities for outdoor use
DENIOS also offers large outdoor facilities. We are pleased to fulfill requirements for the creation of extremely large storage capacities for substances to be heated. We offer large thermal systems with corridor roofing to cover areas between each thermosystem. An ideal solution if there is a lack of space in your existing premises.
When dealing with flammable substances, the formation of an explosive atmosphere is to be expected, especially in the case of thermal processes. The operator is requested by means of a hazard analysis to define corresponding protective measures. DENIOS will support you and, if required, will provide the heating systems according to your ex-zone assessment.
We are happy to help!
Do you need an individual thermotechnology solution? Our engineers face every challenge and work out the best possible solution for your requirements.
We have compiled many interesting project reports from the field of thermotechnology. You will get hands-on insights into the broad field of tailor-made solutions and find out how other companies from different industries use individual thermo-technology solutions from DENIOS.
Good that they exist; but better if you never need them. Emergency slides are part of the safety equipment of every commercial aircraft. To ensure their functionality, the emergency slides are checked regularly. The DENIOS climate simulation roomsenable the realistic verification. During the test phase, a temperature window of -20 ° C to + 60 ° C is passed in a short time. Temperature and time are documented.
An essential part of the manufacturing process of mold release agents and release agents is the temperature-controlled liquefaction of raw materials for further processing. For this purpose, our customer needed a tailor-made heat chamber. The special challenge: the production area at the customer's site was almost completely exhausted and an extension was not possible. A heat chamber with a high capacity needed to be realised on the smallest of footprints.
Cadbury Schweppes needed an individual thermotechnology solution, which ensured efficient thermal processing and temperature controlled storage of important ingredients used in the production process. DENIOS developed a decentralized solution here - a heating chamber, a container with roller doors and a stainless steel heat box with temperature control and hinged doors. For the treatment and storage of chemicals, the heat chamber and the heat box were equipped ex-protected.
We are proud of our holistic approach and therefore at your side from first contact until far beyond the commissioning of your individual thermal solution. This begins with expert advice and planning. Together with you, our experienced sales engineers create the first concepts. The permanent exchange with our engineering team guarantees a technically perfected solution designed to fully meet your requirements.
Our specialized staff are knowledgeable in current legislation and requirements and will support you in dealing with authorities and in the approval process. During the development phase, a personal project engineer will assist you, so that you can always find out about the current project phase. He coordinates the project processes: from the design to our in-house production to on-site assembly. In addition, he is available to answer any questions you may have about your custom solution.
|Need more information or advice? Call 01952 700 567 to speak to a DENIOS expert.|