 Narrow passageways in front of the enclosure and restricted clearance at the sides made it necessary to find a special solution for opening the doors. Wing doors would have required too much space in all directions; the solution for this situation was to install slide-up doors.
Temperature controlled enclosure with three heating zones for storage of two IBCs respectively. The temperature in each zone can be independently regulated by an electrical recirculating air heater. Without this solution, three different enclosures/containers would be required to carry out this task.
Explosion proof design
|
|
EG conformity statement
|
|
|
A series of large temperature controlled enclosures: these containers can be installed both outdoor and indoor as a standard: glazed canopy roofing over the aisles between these enclosures meant that construction of a hall to house the containers was not necessary.
In this continuously heated temperature controlled enclosure, the media stored are conveyed on roller conveyors to a different production station while they are in the process of being heated up. More belt conveyors on the other side of the enclosure recover the drums for further transport. The separation of loading and unloading areas, furthermore, ensures optimized transport within the plant and, consequently, process optimization too.
|
| 
